- Ducting, Diffuser and Accessories
- Packaged Outdoor
- Split Systems and Condensers
- Actuator
- Air Compressor Parts, Components and Accessories
- Air Cond Bracket
- Air Conditioner Sensor
- Air Conditioning Control System
- Air Cooled Chiller
- Air Cooler
- Air Filters
- Air Handlers
- Air Handling System
- Air Swing Motor
- Air Swing Motor (Small)
- Air Terminals HVAC
- Air-Cond and Refrigeration Tooling
- Air-Conditioner Unit
- Anti Clog
- Automatic Drain Valve
- Belting
- Brazing Equipment & Accessories
- Carrier Parts
- Chemicals
- Chilled and Induction Beams
- Chiller Components
- Chiller Parts
- Actuators
- Bearings and Bushing
- Compressors
- Contactors
- Electronic Components
- Fans and Fan Blower Parts
- Filters and Filter Parts
- Gaskets
- Miscellaneous Electrical Parts
- Miscellaneous Fasteners and Fittings
- Miscellaneous Valves
- Motors
- O - Rings
- Oil and Fluids
- Preventive Maintenance Kits
- Pump
- Relays
- Relief Valves
- Repair Parts Kits
- Solenoid Valves
- Switches
- Thermal Expansion Valves
- Transducers
- View All
- Cleaning Equipment & Tools
- Cold Room Parts and Accesories
- Commercial Chiller Components
- Component
- Compressor
- Compressor Accessories
- Condensate Drainage Pump
- Condensing Unit
- Cooling Coil
- Cooling Tower Spare Part
- Copper and Fittings
- Copper Piping Leak Test
- Coupling
- Daikin /Acson / York Spare Parts
- Electrical
- Electronic Air Cleaner
- FAN BLADE / FAN PROPELLER
- Fan Coils
- Fan Motor
- Fan Set
- Filter Aircond
- Fire Duct Systems
- FRIDGE & REFRIGERATOR PARTS
- Hardware Items and Tools
- Induction Units
- Innerco Piercing Valve
- Insulation
- Lubricant Oil and Equipment
- Measuring Instrument
- Packaged Indoor
- PCB Board
- Pressure Test Equipment and Accessories
- Purifier Series
- Refrigerant
- Sensors
- Silicone Sealant
- Spray Pump
- Temperature / Humidity Display & Controller
- Underfloor Air Distribution
- Unit Ventilators
- Vacuum Pump
- Valve (Water/Steam Application)
- Water Cooled Chiller
- York Chiller Parts
- Others
- Others
United Faith Sdn Bhd (HQ)
6 (Ground Floor), Jalan BPU 6, Bandar Puchong Utama, 47100 Puchong, Selangor, Malaysia.
.png)
PJ Branch :
13, Jalan 21/37, SS 2, 47300 Petaling Jaya, Selangor, Malaysia.
Carrier® ChillerVu™ Chilled Water System Optimizer OPN-OPT-OL
| Previous | 25 / 29 | Next |
- Carrier Air Conditioner Control System Malaysia
- Carrier i-Vu Controllers Malaysia
- Carrier Air Conditioner Controllers Malaysia
- Carrier HVAC Controllers Malaysia
- Chilled Water System Optimizer OPN-OPT-OL Malaysia
The Carrier® ChillerVu™ chilled water system optimizer is a sophisticated, scalable, native BACnet plant optimization solution for chiller plants. The chilled water system optimizer minimizes the energy use of the entire chilled water system, up to and including air handling units. The factory-engineered control program is designed to provide a supervisory level of control over the chilled water production of the chiller plant, managing the plant chilled water supply temperature and the condenser water supply temperature to provide optimal energy usage while maintaining occupant comfort in the building.
Features
Specifications
The Carrier chilled water system optimizer seamlessly interfaces with Carrier’s ChillerVu plant system manager, further improving efficiency for plants consisting of Carrier 19, 23, or 30 series chillers (air or water-cooled) and non- Carrier chillers. Setpoint, plant status, machine energy consumption and other system data are easily exchanged between ChillerVu and the chilled water system optimizer.
Features
System Benefits
- Compatible with Carrier’s ChillerVu™ plant manager
- Easy startup and commissioning using the i-Vu user interface
- Fully plug-and-play with the Carrier i-Vu building automation system. As an integrated component of the i-Vu BAS, the controller can respond to the needs of the building, automatically resetting the chilled water and condenser water supply temperatures
- Supports integration to chiller plant equipment using BACnet and Modbus® protocols
- Embedded trends and alarms provide insight into chiller plant performance, and also aid in system tuning, maintenance, and troubleshooting
Energy Savings
- Enhanced chilled water setpoint algorithm dynamically adjusts the plant setpoint to maximize energy savings
- Dynamic condenser water setpoint algorithm adjusts to maintain optimal tower setpoint, minimizing chiller lift, and taking into account ambient conditions and tower approach
- Chilled water and condenser water reset algorithms can be enabled/disabled easily to view energy savings in real time
- Intelligent learning algorithms find the optimal energy usage while maintaining comfort conditions
- Automatically adapts to changing conditions
Software Features
- Intuitive pre-built dashboard shows total plant energy usage at a glance
- Easily configured and updated using EquipmentBuilder
Robust Control Features
- Reads power consumption from connected equipment: chillers, pumps, towers and air handlers
- Balances chiller energy savings against fan and pump energy consumption
- Calculates plant kW, tonnage, and kw/Ton
- Works as an overlay on virtually any existing BACnet plant control systems, including Carrier ChillerVu™
Specifications
| BACnet Support | Advanced Application Controller (B-BC), as defined in BACnet 135-2012 Annex L, Protocol Rev. 9 | |
| Communication Ports |
Ethernet Port (E1): 10/100 BaseT Ethernet port for LAN, BACnet/Ethernet, BACnet/IP, and/or Modbus TCP/IP communications BACnet Port: ARC156 communication port Port S1: EIA-485 port for BACnet MS/TP @ 9600, 19200, 38400, and 76800 baud Port S2: Configurable EIA-485/EIA-232 port for third party network connections, including: » BACnet MS/TP @ 9600, 19200, 38400, and 76800 baud » Modbus (RTU and ASCII modes) @ 9600, 19200, 38400, and 76800 baud Local Access Port: For system start-up and troubleshooting (115.2 kbps) Rnet Port: For connecting Carrier communicating room sensors and Carrier’s touchscreen interface |
|
| Protection |
Incoming Power: Replaceable 3 Amp Pico® fuse Network: Non-replaceable internal solid-state polyswitches that reset themselves when fault clears. The power, network, and I/O are also protected against voltage transient and surge events. |
|
| Battery | 10-year Lithium CR123A battery provides a maximum of 720 hours of time retention during power outages. | |
| Status Indicators | LED status for communications and low battery. 7-segment status display for running, error, and power. | |
| Listed By | UL-916 (PAZX), cUL-916 (PAZX7), CE, FCC Part 15-Subpart B-Class A. | |
| Addressing | Rotary DIP switches set MAC address of controller | |
| Real-Time Clock | Battery-backed real time clock. | |
| Environmental Operating Range |
Operating: 0 to 140ºF (-18 to 60ºC); 0 to 90% RH, non-condensing Storage: -20 to 140ºF (-29 to 60ºC); 0 to 90% RH, non-condensing |
|
| Power Requirements |
24VAC ± 10%, 50-60Hz 24 VA power consumption 26VDC (25V min, 30V max), 10W |
|
| Dimensions |
Overall A: 7-1/2” (19.1 cm) B: 11-3/8” (28.9 cm) Mounting C: 5” (16.38 cm) D: 10-7/8” (27.6 cm) E: 1-1/4” (3.2 cm) F: 1/4” (.6 cm) Depth: 1-1/2” (3.8 cm) Weight: 1.4 lbs. (.64 kg) |
|